CEMENTITIOUS GROUTS
(ANSI A118.6) STANDARD GROUTS
AC-CENT GROUT
Sanded and Non-Sanded, Meets ANSI A118.6-H2.1
Ac-Cent Grout is an advanced polymer-modified Portland cement based colored grout. Ac-Cent's unique blend of Portland cement, specially graded silica fillers, powdered latex modifiers and colorfast pigments provides for a superior grout with excellent flexural and bond strengths, color control, minimal efflorescence and high compressive strength. Additionally, Ac-Cent Grout is protected by AMT technology, which resists bacteria, mold and fungus, and associated bacterial stains. Ac-Cent grout can be mixed with ColorCure Grout Additive for improved bond flexural and compressive strength, in addition to color consistency.
Datasheet MSDS Short Form Specification
AR GROUT
Non-polymer Modified Portland Cement, Sanded Only Grout
AR Grout is a blend of Portland cement and specially graded silica sand to form a dense matrix free of any voids. In addition, special chemicals have been added to provide for rapid cure, high compressive strength and low shrinkage. Because AR Grout is a portland cement product it does not support the growth of mold or mildew. ANSI A118.6-H2
Datasheet MSDS Short Form Specification
DRY TILE GROUT
Advanced, Non-Sanded, Portland Cement Based Grout
Dry Tile Grout is an advanced non-sanded Portland cement based grout for grouting interior and exterior installations of NON-VITREOUS tiles and marble where joint widths will not be in excess of 1/8". Because Dry Tile Grout is protected by AMT technology, it resists bacteria, mold and mildew, fungus and associated bacteria stains. Dry Tile Grout can be mixed with Color Cure Additive in leiu of water to improve hardness, flexural strength, density and color consistency. ANSI A118.6-H2.3
Datasheet MSDS Short Form Specification
EPOXY GROUTS
(ANSI A118.3) CHEMICAL RESISTANT, WATER
CLEANABLE GROUTING EPOXY
EPOXYPLUS 2002
ANSI A118.3 100% Solids Epoxy Grout
EpoxyPlus 2002 is a 100% solids blend of epoxies and special integrally colored silica fillers, which eliminates pigment staining of tiles, typical of traditional cement and epoxy grouts and joint fillers. EpoxyPlus 2002 has exceptionall high chemical resistance to many acids, alkalies, solvents and household stains. EpoxyPlus 2002 may be used for grouting both floor and wall installations between 1/8" to 3/8" wide.
Datasheet MSDS Short Form Specification
ASSOCIATED PRODUCTS
TUB & TILE CAULK
Tub & Tile Caulk is a superior quality siliconized acrylic latex caulk that is mold and mildew resistant. it forms a long-lasting, flexible, water tight seal that will resist cracking on most building materials including glass, wood, ceramic, metal and stone. CureCaulk is available in all 40 TexRite grout colors in sanded and non-sanded versions.
Datasheet MSDS Short Form Specification
GROUT STAIN
Durable Water Based Urethane Acrylic Grout Stain
Grout Stain is a waterborne, urethane acrylic grout stain designed to change the color of grout joints. Grout Stain may be used on cementitious sanded or non-sanded grout to correct an unacceptable grout color condition or to completely change the color. This special formula is designed to make the grout joint look new and is easily maintained while resisting most stain producing products. Grout Stain requires no sealer applications after it is fully cured.
Datasheet MSDS Short Form Specification
C-CLEAN 985
Tile and Grout Cleaning Granules
C-Clean 985 is a sulfamic acid based product developed to safely clean cement grout residue and efflorescence from ceramic tile and cement grout surfaces.
Datasheet MSDS Short Form Specification
CITRUS CLEANER 988
Citrus Based Tile and Grout Cleaner
Citrus Cleaner 988 is a pH neutral, heavy duty cleaning solution that removes grease, oil and grime from grout joints and tile surfaces. It will also help to remove epoxy haze when used within 24 hours of epoxy grout application. This product is not designed to remove dried epoxy on the tile surface and it is not a replacement for thorough clean-up of epoxies at the time they are applied.
Datasheet MSDS Short Form Specification
COLORCURE GROUT ADMIXTURE
Enhanced Latex Liquid Additive for All Portland Cement Grouts
ColorCure is a blend of latex emulsions and special chemical modifiers that have been specially formulated to greatly improve the physical working and performance characteristics of Portland cement based grouts. Used in place of water when mixing, ColorCure latex admixture chemically insures more complete hydration (curing) of Portland cement based grouts which inhibits the development of many of the grouting problems commonly encountered such as initial discoloration, color fading, powdering, cracking and efflorescence.
Datasheet MSDS Short Form Specification
|
|
|
|
