G-PATCH 100 Patching and leveling small areas of interior surfaces Description G-PATCH 100 and G-PATCH 100 NS are a specially compounded interior grade, gypsum, dry powder which when mixed with water or Texrite’s Latex Bond Admix 150 liquid provides a fast acting, quick setting, non-shrinking material for patching small areas of uneven floors, walls and other surfaces which must be prepared for a decorative finish or resilient covering. It is available in 2 versions G-PATCH 100 and G-PATCH 100 NS “nonsanded” grades. Benefits: G-PATCH 100 and G-PATCH 100 NS easily accommodates fast drying and sanding of patch for same day installation. COLORS: White PACKAGING: 25 lb (11.3 kg) multi-wall bags. DATA SHEET SAFETY DATA SHEET
HYDRO-RITE FS Fast-setting waterproofing and crack isolation membrane Description HYDRO-RITE FS is water based, liquid applied, elastomeric, waterproofing and crack isolation membrane for interior or exterior tile installations (ceramic, porcelain, glass). It can also be used as a moisture barrier for interior installation of wood, vinyl and carpet flooring. HYDRO-RITE FS when used as a crack isolation membrane reduces crack transmission in ceramic tile or stone floors and allows the installation of tile surfaces to substrates subject to deflection up to 1/240th of the span. Benefits Allows flood testing after 8 hours of second coat is completely dry Prevents tile cracking and offers superior waterproofing properties Allows for thinner application layer, resulting in better coverage New, smoother consistency that allows for easier roll-on application Bond compatible with tile-setting mortars, beds and other Portland cement coatings Use interior or exterior Water-based, water clean-up Meets and exceeds ANSI A118.10 & A118.12 COLOR: Green PACKAGING: 1 and 3.5 gallon pails. DATASHEET SAFETY DATA SHEET
LATEX BOND ADMIX 150 Professional grade latex liquid admixture Description LATEX BOND ADMIX 150 is a blend of latex (SBR – styrene butadiene rubber) emulsions and special chemical modifiers that have been specially formulated for the addition to Texrite’s dry-set mortars, grouts and underlayment systems. This admixture, when used in lieu of water, will significantly improve the bond strength and flexibility of mortar systems. In addition, it will increase a mortar’s internal adhesion, frost resistance, flexural strength and inhibits the penetration of water or other liquids. Benefits Increase adhesive bond, hardness and flexibility Enhances durability and weather resistance Use in screeds, patches, bonding mortars and grouts Add as surface primer in place of water to mix COLORS: White PACKAGING: 4/1 Gallon Bottles, 5 gallon pails, 55 gallon drum. DATA SHEET SAFETY DATA SHEET
LATEX BOND ADMIX 200 High performance premium latex liquid Description LATEX BOND ADMIX 200 is a blend of latex (SBR – styrene butadiene rubber) emulsions and special chemical modifiers that have been specially formulated for the addition to Texrite’s dry-set mortars, grouts and underlayment systems. This admixture, when used in lieu of water, will significantly improve the bond strength and flexibility of mortar systems. In addition, it will increase a mortar’s internal adhesion, frost resistance, flexural strength and inhibits the penetration of water or other liquids. Benefits Use with Screed 375 powder for patching and leveling Upgrades dry-set mortars ANSI A118.1 to exceed A118.4 Allows bond to “old” of concrete and masonry Higher compressive and bond strength Enhances durability and weather resistance Add in place of water COLORS: White PACKAGING: 5 gallon pails. DATA SHEET SAFETY DATA SHEET
LHT Standard grade, large and heavy tile dry-set mortar for floors and walls Description TEXRITE LHT is a standard grade, polymer modified, large and heavy tile mortar, pre-blended with powdered latex polymer. It is composed of portland cement, sand and special additives that give it a very smooth and creamy feel when used. It is used as a bond coat for large format tile and stone, for interior and exterior use, over concete and cementitious substrates. It can be used for setting porcelain tile, ceramic tile, natural marble and stone for service in residential and commercial use. Benefits For ceramic, porcelain or natural stone tile 15” Can be used up to 3/4” thick For interior and exterior, floors and walls Non-sag properties that helps to reduce lippage Freeze thaw resistant Latex modified Meets or exceeds ANSI A118.1, A118.4, and A118.11 ADD WATER ONLY COLORS: Gray or white. PACKAGING: 50 lb (22.7 kg) bags. DATA SHEET SAFETY DATA SHEET
MORTAR BED 500 Standard grade, Portland cement mortar bed Description MORTAR BED 500 is a blend of Portland cement and graded silica aggregates developed to produce a dense substrate on which to apply ceramic tile or stone. MORTAR BED 500 is a factory controlled, consistent proportioned pre-blended mortar. Simply add water or LATEX BOND ADMIX 150 liquid additive and mix to a smooth, easy to apply 1.25″ – 2″ thick mortar bed. Benefits Portland cement based Application 1.25” – 2” thickness Reliable, consistent, factory blend Allows cost-effective use of labor Mix Latex Bond Admix 150 liquid for heavy-duty/exterior application COLORS: Gray PACKAGING: 50 lb (22.7 kg) multi-wall bags. DATA SHEET SAFETY DATA SHEET
MP 500 Premium Multipurpose Adhesive Description MP 500 is an environmentally superior, premium multi-purpose flooring adhesive. It provides a strong permanent bond with a fast tack, no lingering odor and is solvent free. Benefits Designed for LVT, LVP, VCT, Carpet, sheet goods and cork backings. Strong permanent bond. Fast tack and great working time. Environmentally safe. COLOR: Tan PACKAGING: 4 gal. DATA SHEET SAFETY DATA SHEET
MULTI-PURPOSE Professional grade, latex-modified, dry-set mortar Description MULTI-PURPOSE is a professional grade, specially refined dry-set mortar with latex-polymer powder pre-blend in the bag. Composed of portland cement, sand and special polymer additives, MULTI-PURPOSE is used as a bond coat for setting all types of ceramic tile, porcelain tile, marble and stone over a variety of substrates. MULTI-PURPOSE oers the economy and ease of application of dry-set mortars while significantly improving bond strengths, freeze-thaw stability, flexibility and other qualities. Benefits Excellent for porcelain tile and natural stone For interior or exterior Freeze thaw resistant Walls or floors Latex modified High bond strength Bonds to exterior grade plywood (EGP) Meets or exceeds ANSI A118.1, A118.4, A118.11 Add water only COLORS: Gray or white. PACKAGING: 50 lb (22.7 kg) bag. DATA SHEET SAFETY DATA SHEET
PATCH 125 FS High performance fast-drying, polymer-modified cement based patching compound Description PATCH 125 FS is a polymer modified, fast curing, mildew resistant, portland cement based floor leveling system for leveling most floor types prior to the installation of resilient flooring, carpet, wood flooring, ceramic or stone tile. For most applications PATCH 125 FS requires only the addition of water to develop a dense water resistant surface. This product contains special chemicals which, when properly mixed (with water only), will feather edge to a non-cheking, durable surface. Benefits Feather edge to ½” thickness Fast setting patch Portland cement based No gypsum Mildew resistant Interior / exterior Trowelable Will not crack or shrink Trowel marks sand with ease Skimcoat old prepared cutback adhesive Add water only DATA SHEET SAFETY DATA SHEET
SCRATCH COAT 150 Standard grade lightweight Portland cement mortar bed Description SCRATCH COAT 150 is a lightweight, portland cement and sand-based browncoat that is specifically designed as a plaster substrate for ceramic tile. SCRATCH COAT 150 may be used with or without metal lath over approved surfaces as outlined in the directions. This materials allows the applicator to do the complete installation in the shortest posible amount of time. Benefits Use 3/8” – 5/8” (10-15 mm) thickness Lightweight formula Imposes less dead load on structural members Easier to handle and mix Uniform quality eliminates individual mixing of cement/sand Eliminates the use of metal lath Reduces shrinkage Vermin proof Rot proof Fire proof COLORS: Grey (white on special request). PACKAGING: 50 lb (22.7 kg) multi-wall bags. DATA SHEET SAFETY DATA SHEET
SCREED 750 Description SCREED 750 is a self-curing, portland cement based, specialized aggregate and liquid latex floor leveling system designed for applications from 1/8” thickness to 3” thickness. A development of our own research laboratory, it is used for the deep leveling of concrete or other portland cement based substrates prior to the installation of resilient floor coverings carpet and ceramic tile. Benefits Trowelable underlayment, portland cement based leveler. Follow procedures EJ171 in the TCNA Handbook for ceramic tile and stone installation. COLORS: Gray PACKAGING: 7 – 50 lb bags of powder and 1 – 5 gal pail of latex DATA SHEET
SPEEDRITE FS Builders grade, fast setting dry-set mortar Description Speedrite FS is a factory blend of Portland cement, sand and special chemical additives which produce an excellent, fasts-setting dry-set mortar. Speedrite FS enables the contractor to set tile and grout within two hours so that he will have a finished installation which can be open to foot traffic in four hours. Benefits For setting absorptive, semi-vitreous and vitreous ceramic tile Fast bonding Open to foot traffic in 4 hours Residential and commercial use Walls or floors Upgrade bond by adding Texrite’s Latex Bond Admix 150 or Acrylic Admix 150 fs COLORS: Gray only PACKAGING: 50 lb (22.7 kg) bags DATA SHEET SAFETY DATA SHEET
TEXRITE LHT PLUS FORMERLY KNOWN AS CERAMABOND LHT Polymer-modified large and heavy tile mortar. Description TEXRITE LHT PLUS is a professional grade, polymer modified, medium bed mortar pre-blended with powdered latex polymer. It is composed of portland cement, sand and special additives and is used as a bond coat for large format tile and stone for interior and exterior use over concrete and cementitious substrates. TEXRITE LHT PLUS offers the ease of application and economy of dry-set mortars while significantly improving bond strength, freeze-thaw stability, flexibility and many other qualities. Benefits Professional formula to hold 15” x 15” and larger tile and stone Can be used up to ¾” thick For interior and exterior use Reduces lippage Excellent water and impact resistance Meets or exceeds ANSI A118.1, A118.4, A118.11 COLORS: Gray or white. PACKAGING: 50 lb (22.7 kg) bag. DATA SHEET SAFETY DATA SHEET
TEXRITE SET-RITE FORMERLY KNOWN AS CERAMAMIX Standard grade mortar for tile and stone installation. Description TEXRITE SET-RITE is a builders grade, polymer modified dry-set mortar used as a bond coat for setting porcelain tile, ceramic tile, natural marble and stone for service in residential and commercial use. It is used in a mortar bed as thin as 3/32” – 3/16” (3-5 mm) after the tiles have been properly embedded. Benefits Good for porcelain tile and natural stone For interior or exterior Freeze thaw resistant Walls or floors Latex modified High bond strength Meets or exceeds ANSI A118.1, A118.4 Add water only COLORS: Gray or white. PACKAGING: 50 lb (22.7 kg) bag. DATA SHEET SAFETY DATA SHEET
TEXRITE TOTAL FLEX Extremely flexible mortar, for large and heavy tile and stone installations. Description TEXRITE TOTAL FLEX is a extremely flexible, enhanced large and heavy tile mortar. It is composed of Portland cement, sand and special additives and is used as a bond coat for setting thick marble, granite, and other large and massive tiles like thin porcelain panels over a variety of substrates. TEXRITE TOTAL FLEX offers the ease of application and economy of dry-set mortars while significantly improves bond strength, freeze-thaw stability, flexibility and other qualities Benefits Specially designed for installation massive and heavy tiles & stones in tough applications Perfect for glass tile installations For interior and exterior floors and walls Can be used up to ¾” thickness Excellent non-sag properties on vertical surfaces Specially formulated to withstand for submerged applications Meets and exceeds ANSI A118.1, A118.4, A118.11, A118.15 COLORS: Gray or white. PACKAGING: 50 lb (22.7 kg) bags DATA SHEET SAFETY DATA SHEET
TUB AND TILE CAULK Siliconized acrylic latex caulk DESCRIPTION TUB AND TILE CAULK is a siliconized acrylic latex caulk that forms a long-lasting, flexible, water tight seal that will resist cracking in most building materials including ceramic tile, stone, glass, wood and metals. Easily applied by the professional or homeowner, it is available in Texrite’s designer grout colors in sanded or non-sanded form. COLORS: 28 standard colors PACKAGING: 10.3 oz cartridge (6 tubs per case). DATA SHEET SAFETY DATA SHEET